How to port Clockworkmod Version 6 (Carliv Touch Recovery) to your MTK devices

How to port Clockworkmod Version 6 (Carliv Touch Recovery) to your MTK devices

Requirements
* USB debugging enabled on the phone (Settings > Developer . If no Developer under Settings, go to Settings > About > Keep tapping Build Number till Developer appears under Settings)
* USB cord
* A PC

2. Extract the content of CTRv2.2.zip to a folder
4. Enable USB debugging on the phone then connect it to the PC
5. Temporarily disable your Antivirus
6. Launch CTRv2.2.exe as Administrator on your PC
7. CTRv2.2.exe will be automatically copied to your desktop Click Ok to proceed
8. Click Yes to disable UAC
9. Click Yes for Auto-Port
10. Ensure the phone is connected to the PC with USB debugging enabled then click Ok
11. The Tool will Auto-detect your Chipset. you could click Ok or just leave it as it will automatically proceed
12. The Tool will Auto-detect your Partition type. You could click Ok or just leave it as it will automatically proceed
13. The Tool will Auto-detect your Screen resolution. you could click Ok or just leave it as it will automatically proceed
14. The Tool will prompt you to reboot in recovery mode. you could click Ok or just leave it as it will automatically proceed
15. If porting  was successful, you will get a prompt confirming the success Clockworkmod Version 6  (Carliv Touch Recovery) to the MTK phone
16. Congratulations! You now have Clockworkmod Version 6 on your MTK phone

How to install drivers on your android phones

This guide will explain an easy method of installing Mediatek / MTK drivers for your phone on a PC.
Requirements
* PC
* USB cord
* A Working phone who’s drivers you wish to install
* Download PdaNet( This can be downloaded from the ADB drivers for smartphone link above)

Procedures
* Enable USB Debugging on the working MTK phone (Settings >Developer options > Tick USB debugging)
* Connect the working phone to PC with USB debugging enabled
* Install PdaNet on the PC
* When prompted to select phone type, choose “Other”
* At the end of PdaNet installation, you should get a “Drivers
successfully installed” message.
* Exit PdaNet in system tray (bottom right corner of PC)

This tutorial should guide you on how to set up ClockworkMod Version 6 on your Mediatek devices

Posted by Busayo

I Love everything that revolves around gadgets. I am an Android lover, SEO Expect and Content Creator.

Leave a Reply

Your email address will not be published. Required fields are marked *